• 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 中小型无尘车间需要从哪些模式出发?
    来源: 浏览: 发布日期:2020-04-09
    对于厂房装修中的中小型无尘车间的改造,由所以旧厂房,又是中小型无尘车间,所以不能依照新装修的要求来建设无尘车间。而是要根据实际状况,再结合空气净化的基本原则,设计出一套有用的改造方案,这套方案包括气流循环形式、结构形式两部分。
    For the renovation of the small and medium-sized dust-free workshop in the workshop decoration, the old workshop is also the small and medium-sized dust-free workshop, so the dust-free workshop cannot be built according to the requirements of the new decoration. But according to the actual situation, combined with the basic principles of air purification, we should design a set of useful transformation scheme, which includes air circulation form and structure form.
    1.气流循环形式
    1. Air circulation form
    这套形式的运作方式为空气经过送风设备进入静压箱,经过过滤后进入无尘车间,再从新风设备中进入回风夹道。其中,一部分回流空气与新风设备中的空气混合后进入风机室。另一部分回流空气直接进入空调的进风口,待空气冷却后经过导流罩和凉风管进入风机室。两部分空气在风机室混合后,经过中效过滤器把混合后的空气送入静压箱,再经过过滤器送入无尘车间,然后构成一种循环。
    The operation mode of this set is that the air enters the static pressure box through the air supply equipment, enters the dust-free workshop after filtration, and then enters the return air passage from the fresh air equipment. Among them, a part of the return air mixes with the air in the fresh air equipment and enters the fan room. The other part of the return air directly enters the air inlet of the air conditioner. After the air is cooled, it enters the fan room through the guide hood and the cooling air pipe. After the two parts of air are mixed in the fan room, the mixed air is sent to the static pressure box through the medium efficiency filter, and then to the dust-free workshop through the high efficiency filter, which forms a cycle.
    韦德1946最新网站
    从上文先容的空气循环状况中咱们能够得知,这套气流循环形式构成了很好的三级过滤状况,然后确保了无尘车间的整体空气质量。而在此基础上调整过滤器送风口的结构和布局,再配合相应的风量,能够调整无尘车间的洁净形式和洁净度,以习惯不同需求。
    From the air circulation situation described above, we can know that this air circulation form constitutes a good three-stage filtration condition, and then ensures the overall air quality of the dust-free workshop. On this basis, the structure and layout of the air supply outlet of the high-efficiency filter can be adjusted, together with the corresponding air volume, to adjust the clean form and cleanliness of the dust-free workshop, so as to get used to different needs.
    2.结构形式
    2. Structural form
    厂房内中小型无尘车间的大致结构为墙面采用夹芯彩钢板,顶部设有风机室,其中装有风机箱。风机室的周围都进行了关闭,设有向内通风的中效过滤进风口。风机装在风机箱内,下面为静压箱和过滤器。无尘车间下侧没有回风初过滤器,外侧为回风夹道,回风夹道之间有一个分体式空调机。
    The general structure of the small and medium-sized dust-free workshop in the workshop is that the wall is made of sandwich color steel plate, and the top is equipped with a fan room, which is equipped with a fan case. All around the fan room are closed, and a medium efficiency filter air inlet for inward ventilation is provided. The fan is installed in the fan case, under which are the static pressure box and high efficiency filter. There is no primary return air filter at the lower side of the dust-free workshop, and there is a return air duct at the outer side. There is a split air conditioner between the return air ducts.
    分体式空调机的出风口设有导流罩和凉风管,凉风管的一端装在出风口,另一端装在风机室内。至于分体式空调机的型号,一般类型即可满意中小型无尘车间的需求了。如果送风距离偏远,能够在凉风管上加装风机,以便添加送风压力。
    The air outlet of the split air conditioner is provided with a guide cover and a cooling air pipe. One end of the cooling air pipe is installed in the air outlet and the other end is installed in the fan room. As for the model of split air conditioner, the general type can meet the needs of small and medium-sized dust-free workshops. If the air supply distance is remote, fans can be installed on the cooling air duct to add air supply pressure.
    本文来自:韦德1946最新网站更多的内容请点击:大家将会为您提问的问题提供一个满意的服务,欢迎您的来电!
    This article comes from: laboratory decoration more content please click: we will provide a satisfactory service for your questions, welcome your call!
    XML 地图 | Sitemap 地图