• 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 洁净室洁净工程如何提高整体性能?
    来源: 浏览: 发布日期:2017-11-08
    洁净室在设计建设过程中要追求严谨性,每个细节都要考虑到,如果不严格遵守相关建设规范与管理要求,很难达到预期的净化效果,影响整个洁净工程的实际使用性能。
    Clean room in the design and construction process to the pursuit of rigor, every detail should be considered, if not strictly abide by the relevant regulations and requirements of construction management, it is difficult to achieve the desired effect of purification, affect the actual performance of the whole clean engineering.
    韦德国际1946手机版厂家的小编先容,对于层流洁净室的维持有着十分严格的要求,下面以日常管理方面为例,来帮助大家了解。
    Air purification engineering of small manufacturers, has very strict requirements for maintaining laminar flow clean room, the daily management, for example, to help you understand.

    1、洁净室必须维持于正压状态,且保证洁净工程洁净区应与非洁净区高于10pa。
    1, clean room must maintain Yu Zheng pressure state, and ensure clean Engineering clean area and non clean area is higher than 10Pa.
    2、洁净工程净化空调系统应连续运行,且定期进行清洁维持工作。
    2, clean engineering air conditioning system should be continuously running, and regular cleaning and maintenance work.
    3、洁净工程洁净区内的温湿度应做好控制与维持工作,必须根据企业的实际生产需要来设置,一般情况下温度为22~25摄氏度,湿度为40%~60%。
    3, clean Engineering temperature and humidity in the clean area should be good control and maintenance work, must be based on the actual production needs of enterprises to set, under normal circumstances, the temperature is 22~25 degrees Celsius, humidity is 40% ~ 60%.
    4、层流洁净室的缓冲区域应设有明显的标识,各洁净区的门必须保证关闭状态,且进出门不可同时打开。
    A buffer zone 4, laminar flow clean room shall be provided with clear identification, the clean area must ensure that the door closed, the door can not be opened at the same time and import.
    希翼上述先容对您有所帮助哦,大家以真诚贴近客户,以行动满足客户,以双赢保有客户,以个性引领客户,您的满意是大家大的追求。
    Hope that the above introduction to help you, oh, we sincerely close to customers, to meet the needs of customers, to win win customers, personality to lead customers, your satisfaction is our greatest pursuit.
    XML 地图 | Sitemap 地图